Facebook

80,000 Rub Martindale Abrasion Testing for Synthetic Silicone Leather

Martindale Abrasion Testing of Silicon X Series Synthetic Leather

MICOOSON supplies synthetic leather materials with different surface finishes and backing constructions.

For buyers evaluating abrasion-resistant synthetic leather, laboratory testing can provide useful information about the resistance of a material to surface wear under defined conditions.

MICOOSON has third-party Martindale abrasion testing documentation for a submitted sample identified as Synthetic Silicone Leather with Suede Backing – Silicon X Series.

The test report records a Pass result against an 80,000-rub requirement under ISO 12947-2:2016.

What Is the Martindale Abrasion Test?

The Martindale abrasion test is commonly used to assess the abrasion resistance of textile and coated textile materials.

ISO 12947-2:2016 specifies a method for determining specimen breakdown during abrasion testing.

The method evaluates the behaviour of a test specimen under defined laboratory conditions, including specified pressure and repeated rubbing.

Martindale test results can help material buyers compare performance requirements, but results from different test conditions should not automatically be treated as equivalent.

Silicon X Series Abrasion Test Report Information

The test report identifies the following information:

  • Report Number: 304148831a 001

  • Report Date: November 19, 2025

  • Sample Description: Synthetic silicone Leather with suede backing – Silicon X Series

  • Color: Black

  • Tested Material: Coated textile

  • Material Number: M001

  • Test Method: ISO 12947-2:2016

  • Nominal Pressure: 12 kPa

  • Required Number of Rubs: 80,000

  • Reported Number of Rubs to Breakdown: At least 80,000

  • Test Conclusion: Pass

The findings relate to the tested material identified in the report.

The test result should not be interpreted as a guarantee that every MICOOSON synthetic leather product will achieve the same performance.

What Does 80,000 Rubs Mean?

In the Martindale test, rubs refer to repeated abrasion movements applied to a test specimen under defined laboratory conditions.

The MICOOSON Silicon X Series sample was evaluated against a requirement of 80,000 rubs.

The report records a result of at least 80,000 rubs to specimen breakdown and an overall Pass conclusion.

This indicates that the tested sample satisfied the specified abrasion requirement under the documented test conditions.

It does not establish the exact maximum abrasion life of the material or guarantee a particular service life in real-world use.

Material Composition and Construction

The submitted test sample was described as synthetic silicone leather with suede backing.

According to the material composition declared by the applicant in the test report, the sample contained:

  • 75% Polyester

  • 5% PU

  • 19.8% EPU

  • 0.2% Silicone

The tested sample was black and identified as a coated textile.

Buyers should verify product composition, surface coating, backing structure and production specifications when requesting similar materials.

Why Is Abrasion Resistance Important for Synthetic Leather?

Abrasion resistance is an important material performance characteristic for products that may experience repeated contact, friction or surface wear.

When evaluating synthetic leather, buyers should consider:

  • Intended product application

  • Surface finish and coating structure

  • Backing material

  • Martindale testing method

  • Test pressure

  • Required number of rubs

  • Specimen breakdown criteria

  • Applicable customer specifications

  • Material grade and production batch

The abrasion result of a laboratory sample does not replace application-specific testing of the final product.

Synthetic Silicone Leather Supplier – MICOOSON

MICOOSON provides synthetic leather materials for customers seeking different textures, constructions and technical performance characteristics.

For buyers interested in the Silicon X Series or similar suede-backed synthetic leather materials, MICOOSON can provide product information and discuss available technical documentation.

Customers should confirm whether the tested material grade corresponds to the product being considered for purchase.

Frequently Asked Questions

What Is Martindale Abrasion Resistance Testing?

Martindale abrasion testing evaluates the resistance of a material to repeated rubbing under standardized laboratory conditions.

Does MICOOSON Have an 80,000-Rub Martindale Test Report?

Yes. MICOOSON has third-party abrasion testing documentation for a submitted Silicon X Series synthetic leather sample evaluated against an 80,000-rub requirement.

What Standard Was Used for the Test?

The report identifies ISO 12947-2:2016 as the test method.

What Was the Recorded Test Result?

The report records at least 80,000 rubs to specimen breakdown and a Pass conclusion for the tested sample.

What Pressure Was Used During Testing?

The documented nominal pressure was 12 kPa.

Does 80,000 Rubs Mean the Material Will Last for 80,000 Uses?

No. Laboratory rub counts are not directly equivalent to the number of real-world uses or years of product service life.

Does This Test Result Apply to Every MICOOSON Synthetic Leather Product?

No. The test result applies to the submitted sample and conditions documented in the report.

Is a Martindale Test Report the Same as Product Certification?

No. A test report records testing performed on a sample. It does not automatically constitute product certification.

Can Buyers Request Abrasion Testing Documentation?

Customers can contact MICOOSON to enquire about material specifications, available samples and applicable abrasion testing documentation.

Contact MICOOSON for Silicon X Series Synthetic Leather

Looking for synthetic leather with suede backing and documented abrasion testing information?

Contact MICOOSON to discuss your material requirements, request product specifications and enquire about available technical documentation.

Explore MICOOSON Material Test Reports

Professional Certificates

We firmly adheres to the concept of compliance, ensuring every product is reliable and safe to use.

SGS REACH SVHC Test Report for Silicone Microfiber Leather

Intertek Total Fluorine Testing Report for Microfiber Leather

SGS RoHS Heavy Metals Testing Report for Hypalon Material

SGS PAHs Testing Report for Neoprene Material

SGS Tensile Strength, Elongation & Tear Strength Test for 4-Way Stretch PVC Leather

SGS Water Resistance & Breathability Test Report – PASS

TÜV Rheinland REACH SVHC Screening Test Report – PASS

TÜV Rheinland VDA 270 Odour Test Report – Grade 1

TÜV Rheinland Martindale Abrasion Resistance Test Report – 80,000 Rubs

Silicone-Printed Microfiber Leather – REACH and Prop 65 Testing

California Proposition 65 Test Report for Microfiber Leather

EU REACH SVHC Test Report for Microfiber Suede

California Proposition 65 Related Test Report – Lead and Phthalates for PVC Leather

SGS Test Report on Flame Retardant Properties (ISO 3795) for Automotive Interior PVC Leather

SGS Test Report on FMVSS 302 Flame Retardant Performance of PVC Leather for Automotive Interiors

SGS Test Report on ISO 3795 Flame Retardancy for Automotive Interior Microfiber Materials

SGS Test Report on FMVSS 302 Flame Retardancy of Microfiber Material for Automotive Interiors

SGS Environmental Test Report

SGS Test Report for Black Microfiber Material

Intertek Test Report: Microfiber Suede + Silicone Print Material

GRS (Global Recycled Standard) Certification Certificate

View More